One minute to teach you how to install a one way vision

One way vision are an advertising material made of black and white PVC laminated with pressure-sensitive adhesive and release paper. They are mainly used for window display, glass doors and windows, glass curtain walls or glass surfaces of vehicles. Kill two birds with one stone

One minute to teach you how to install a one way vision

Step 1: Wipe the glass clean. Use glass cleaning tools.

Step 2: After spraying with detergent, spray the wine evenly. If there is no watering can, you can simply make it with a mineral water bottle.

Step 3: Lift off the protective layer at the corner of the screen, and map the screen to the corner of the glass.

Step 4: From the corner of the glass, slowly tear off the white paper edge on the back, and use the scraper to gently scrape the animation surface up and down to hang out the bubbles.

Step 5: If wrinkles are found, you should lift the screen in time and start again.

Here to say more, there are generally three types of one way vision:

1. Perforation on one side of the sunshade (large hole): the perspective rate is 48% -50%, the perspective effect is high, and the safety factor is large. It is suitable for posting on vehicles and glass surfaces with higher perspective effects.

2. Perforation on one side of the sunshade (small hole): the perspective rate is 30% and the perspective effect is poor, but the advertisement screen is clearer and there are more ink dots.

3. Screen printing through one side: the perspective rate can be adjusted freely according to demand, the product cost is low, but the production process is tedious, and the perspective effect depends on the quality of the peelable transparent ink and the plate making process. Large, it is easy to cause the whole to fall off.

The above is the introduction of the installation method and classification of one way vision, I hope it will be helpful to you. The light transmittance of the single one way vision can reach 5: 5, which is the same as the light transmittance of the front glass, which makes the sight clearer and feels cooler, so don't worry too much!